Paul, IMO, I think a gate delay module should support both of these modes.
One mode ends the original gate and delayed gate at key release. The 2nd
mode preserves the original gate length. I see both seem useful.
Larry H
----- Original Message -----
From: paulhaneberg <phaneber@...>
To: <motm@yahoogroups.com>
Sent: Saturday, May 17, 2003 10:22 PM
Subject: [motm] Re: Gate and Trigger Delays
I'm still pondering the idea of whether the gate is preserved if the
key is lifted before the delay time is up.
I looked through some of my dog-eared old ElectroNotes. The
examples of gate/trigger delays mentioned there all end the delayed
gate immediately upon key release regardless of the delay time or
gate length, so gate length is not preserved.
It also appears that my Andromeda with envelopes set to one of the
normal modes also does not preserve gate length if the key is lifted
before the delay period has passed, although there are other modes
with other results.
Maybe I'll go back to my simple R/C timing circuit and save the one-
bit delay line for another module. Then again maybe not.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/