I'm on a roll for 700 applications. This divides a square wave
frequency by two. Good for clocking/gate applications or suboctave
square waveforms.
Required Modules:
320 VCLFO or 390 uLFO or 300 VCO
700 VC Router
Oakley Multimix (MOTM mixer does not have enough gain, need gain of -1)
910 Cascaded Multiple
Connections
300/320/390 TRIANGLE to 700 CV IN
300/320/390 SQUARE/PULSE (set pulse at 50%) to MULT (Note: this needs to
be the same oscillator as the triangle wave)
MULT to Oakley Multimix IN1 and 700 IO A
Multimix OUT1 to 700 IO B
700 IO X is divided square out
Settings:
300/320/390 Rate/Frequency = any
700 Mode = voltage
700 Switch = 0 for square wave, any other setting for uneven pulses
Oakley Multimix IN 1 = -5
For modulation of pulse width, mix the TRIANGLE wave with a second LFO
sine or triangle, then feed that to the 700 CV IN.
John Loffink
jloffink@... The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/