> > The stainless stell is tough, but not impenetrable. I've drilled a
> > couple dozen so far. You'd only need to drill 2 holes to mount a
> > bracket, the rest of the metal that touches the front panel can be
> > notched out with tin snips. I've done this too.
> >
>
> You're a lot more patient than I! That's a lot of metal cutting.
>
Also, as Larry has noted in private email, it is difficult to drill
holes on the small bend of the PCB bracket. The bend in the metal tends
to obstruct drilling access. Drilling from the outside requires
sacrificing a piece of wood for each bracket. This also may not be the
safest drilling position, with a long vertical piece held by hand,
drilling through metal which can have a tendency to catch and spin.
John Loffink
jloffink@... The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com/The Wavemakers Modular and Integrated Synthesizer Web Site
http://www.wavemakers-synth.com/