It looks like all of the SB series pushbuttons are all
not grouped together.
This looks like the best current canidate to me:
SB4011NOHC
This is a SPST Off-(On) button. These also come with
2 hex nuts and 1 lockwasher. The C denotes a red
plunger (black also available). Pluger is made of
pholic resign. The height from the threads is only
0.248". Pre-travel is 0.031". Over-travel is 0.057".
And total travel of plunger is 0.088".
There is also a polyethylene slip-on cap that goes
over the plunger. I really like this. And it
increases the diameter of the plunger from 0.331" to
the cap diameter of 0.394". The part number for the
red slip-on cap is AT422-2C. It does increase the
hight from the threads to 0.346".
The Switch Zone listed lots of distributers for this
pushbutton. Here is some of the NKK info on this:
http://us.switchzone.com/pdf/SB40.pdf--Shemp
> The proposed switch "sticks out" too far. The SB
> series is probably better (look at the Allied
> PDF catalog page, left side about 1/2 way down). I
> haven't had a need for a pushbutton switch up
> until now.
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/