Actually, now that I've given it more than two seconds of thought :) with the
added paint thickness, a 1/2 inch hole is probably perfect.
George
----- Original Message -----
From: <groovyshaman@...>
To: <motm@yahoogroups.com>; Tentochi <tentochi2003@...>; Paul Schreiber
<synth1@...>
Sent: Tuesday, February 25, 2003 6:14 PM
Subject: Re: [motm] New Pushbutton Proposal
> This is a very nice switch. It has a nice selection of colored caps. The
> knurled-face nut would look attractive, however it wouldn't match other nuts.
> There's one with a red plunger (instead of black), but I don't think Allied
has
> it. (SB4011NOHC)
>
> One downer: it needs a metric 12mm hole (.472").
>
> George
> ----- Original Message -----
> From: Paul Schreiber <synth1@...>
> To: <motm@yahoogroups.com>; Tentochi <tentochi2003@...>
> Sent: Tuesday, February 25, 2003 5:38 PM
> Subject: Re: [motm] New Pushbutton Proposal
>
>
> > The proposed switch "sticks out" too far. The SB series is probably better
> (look at the Allied
> > PDF catalog page, left side about 1/2 way down). I haven't had a need for a
> pushbutton switch up
> > until now.
> >
> > Paul S.
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>