Your power load sounds okay, but I remember thinking I was okay with
around 20 modules when I started noticing definite power induced side
effects. You might try unplugging some of the unused modules from the
PS board, particularly some 300/310s and see if this helps.
I have two 320s, a 380 and a 390 all near my VCOs, and powered from the
same PS board. I could not duplicate this problem.
When you say the 320 modulates the 300 waveform, do you mean the timbre
changes rather than the frequency or amplitude?
John Loffink
jloffink@... > On Sun, 9 Feb 2003, John Loffink wrote:
>
> > How many modules are connected to your power supply.? Is this the
stock
> > power supply, or have you upgraded the Power One unit to a higher
> > current unit?
> >
> Stock 900, with some modules connected to the 900's power connectors
and
> some modules connected to a 960 distribution board. 16 modules:
> 820, (2) 310's, (3) 300's, (2) 800's, (1) 320, (1) 440, (1) 410, (1)
110,
> (2) Hendry vc shifts, (1) Oakley 410 companion, 830.
>
> It's been some time ago, but I remember computing mAmps used and
thought
> the sum was easily less than 80% of the 900's max.
> Jeff
>