How many modules are connected to your power supply.? Is this the stock
power supply, or have you upgraded the Power One unit to a higher
current unit?
John Loffink
jloffink@... > -----Original Message-----
> From: Jeffrey Pontius [mailto:jpont@...]
> Sent: Sunday, February 09, 2003 7:47 PM
> To: motm@yahoogroups.com
> Subject: [motm] 320 bleed-through to 300's?
>
> For the first time this evening (so may have been going on prior to
this
> evening) I noticed what I think is "bleed-through" from my 320 into my
> 300's and 310's. When I (only) connect a patch cord from one of the
> waveform outs on any 300 or 310 into the vca of my 110 (and set the
gain
> knob slightly above unity to listen), I can hear the 320 modulating
the
> osc. waveform, and changing the 320's rate knob also changes the
> waveform's
> modulation rate correspondingly. It is not very prominent, but
> definitely noticable. All of these modules are connected to the same
900
> power supply. Any ideas? FWIW, I only built the 310's. Same thing
> happens when I connect any waveform out to the Blacet mixer/vca, which
is
> on a different power supply.
>
> Thanks, Jeff
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ >