Flying wires will not affect the performance.
22 AWG stranded is a common wire size for this type of wiring.
John Loffink
jloffink@... >
> I'd like to adapt an MOTM-320 VCLFO to fit into a FracRak. Since the
> FrakRak is only 5.25" in height I'll need to mount the short end of
> the PCB onto the new front panel (whereas the original MOTM front
> panel has the long end of the PCB mounted to the front panel). This
> means I'll need to remove the pots from the PCB and remount them onto
> the new face plate then attach them to the PCB with flying wires.
> I'd like to use the original pots if possible. My two questions are:
>
> Can I do this without hindering the performance of the VCLFO?
> What would be the best gauge wire to use for the flying wires?
>