thanks for the backup, TJ! i tried a 0.1uf axial ceramic "104" cap soldered
from MOTM-100's OUT ground to tip and am still getting the pitter patter of
little feet.... should i try another cap or am i not wired right?
mark
>Message: 10
> Date: Thu, 7 Oct 1999 00:34:52 -0500
> From: "Paul Schreiber" <synth1@...>
>Subject: Paging Rocket to MOTM-100 lab!!
>
>Looking at schematic: I suspect that a 0.1uF cap across the output terminals
>(just solder it across the OUT jack's lugs) will get rid of the pops. No
>buffer needed.
>This is a kluge but should work. Really, I suspect ∗any∗ NONPOLAR cap from
>0.1uF to 1uF
>will work.
>
>However, a variable slew is fun, too. I had this on my first homebuilt
>modular. Freaky.
>
>Paul S.
>just finished MOTM-410 manual, so off to bed!!
>
>PS: hey TJ! liked the audio, pops and all. How much was MOTM generated??!?
>
>