I don't understand your signal path. "jp6 arpegg in" is an output? Is it
putting out audio or CV signals?
Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@... >
> From: mark scetta <n0nspaz@...>
>
> paul, i am still hearing a click that varies in amplitude on most
> or all of
> the samples. MOTM-100 is set to HOLD, speed & level are at 10.
>
> my audio signal path is:
>
> jp6 arpegg. in --> +15v preamp (set at 3:00) -->Y-split--> motm-100 IN &
> motm-110 VCA IN --> VCA out to mixer
>
> my CV path is:
>
> motm 100 OUT --> motm 110 CV with CV mod pot at 10 and GAIN pot in the
> BIAS region
>
> the clicks aren't loud, sort of like footsteps running along with
> the signal.
>
> i have verified that the switch is wired correctly.
>
> any further help is appreciated.
> mark
>