Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [motm] Multiple tip

From: media.nai@...
Date: 2002-10-10

>>>All things considered, even when ignoring the elegance and added
>>>capability,
>you'll save space, time, and money, by choosing the 910 over a pile of
>otherwise useless Y-cables.<<
>
>Not so, as shown in my above statement.

I don't see how that is shown in your above statement, but you are
certainly entitled to your opinion.

>Even Y-cables increase elegance. It's so much cleaner to use one cable
>with a Y slitter on the end then to run an unnecessary cable to the
>>nearest multiple, then run two cables from there
>back to where you want to go. One cable with a Y connector replacing three
>cables is a cleaner more elegant solution. And if you decide the last
>>minute you need to go to a third destination, just pop one of those
>earlier >mentioned adapters under one of the Y connections and add another
>cable
>and you're done.

Imho, the inelegance is that you need too keep all of these different
adapters and Y-cables, and sift through them to find the cable you want, as
opposed to only one type of cable. I've used Radio Shack cables in the
past and they simply are not reliable. They aren't shielded very well
either, and afaik, they only come in one color. I try not to buy anything
cheap so I don't have to buy anything twice. I have a rainbow of
American-made cables with Neutrik ends you could beat with a hammer. One
of the reasons I chose MOTM is because it is clean and reliable, and a
chain is only as strong as its weakest link.