I am going ahead with this project. I downloaded Schaeffer's CAD software
http://www.schaeffer-apparatebau.de/English/index.htmand the OMS-820 panel design for it. It did not take long to design a 2U
panel that combines the OMS-820 and MOTM-820. I did not have to make any CV
concessions. Omitted from the MOTM panel is the LED, bypass switch, and two
of the output jacks. Omitted from the OMS-820 are the two pushbuttons. All
other panel features are retained. The two boards will fit behind the panel,
each on a separate Stooge bracket. If anyone is interested in my Schaeffer
panel, reply off list to me and I will send you the file.
-Richard
----- Original Message -----
From: J. Larry Hendry
To: MOTM List
Sent: Wednesday, September 25, 2002 9:07 PM
Subject: Re: [motm] MOTM-820 and OMS-820 behind one 2U panel?
Duh! Someone smack me with a 2x4. Still very doable. You only need 1
output jack, ditch the bypass and make one other small CV concession (your
choice) and you are set. The behind the panels stuff will fit with Stooge
brackets.
:)
Larry
----- Original Message -----
From: Richard Brewster
To: MOTM List ; Brousseau, Paul E (Paul)
Sent: Wednesday, September 25, 2002 7:52 PM
Subject: Re: [motm] MOTM-820 and OMS-820 behind one 2U panel?
Right. I want to put the MOTM-820 and OMS-820 together in one 2U panel.
-Richard