Hi all,
Sorry for the OT post, but I figured there are a lot of people that peruse
electronics supply catalogs here...
I recently purchased a video synthesizer, an A2V audio-to-video convertor
(
http://www.audiovisualizers.com/library/store/a2v/a2v.htm). It is fully
assembled except it needs an enclosure, needs jacks wired up and a power
supply.
Can anyone recommend a good power supply for this application? I prefer a
wall-wart with a barrel connector and a matching inlet I can put on the back
of the enclosure, then wire the inlet to the board. According to the manual,
the specs I need are:
+5V 200mA max
+15V 100mA max
-15V 100mA max
Does anyone have any recommendations? I was doing a search for this earlier
but turned up a ton of info and a lot of it was Greek to me, so to speak. I
know how to solder but am otherwise an electronics idiot; yes, I buy all my
MOTM modules assembled...
Thanks in advance.
---Ben Vehorn