Would it be possible to have a remotely operated relay on the AC
input, after the rear panel power switch, inside a power supply like
the MOTM-900? The relay would be controlled by a switch on the front
panel, so that the wiring from the power supply to the front panel
carries no power.
I really would like a front panel power switch and power status leds,
with the AC input on the rear.
Simon
Canberra
AUSTRALIA
>This is NOT a good idea, due to safety reasons.
>
>Paul S.
>----- Original Message -----
>From: <vulture.squadron@...>
>To: "MOTM List" <motm@yahoogroups.com>
>Sent: Friday, August 30, 2002 1:32 PM
>Subject: Re: [motm] Cabinet Power - How To Do It?
>
>> ----- Original Message -----
>> From: Simon <simon@...>
>> > I would like to have AC power connected to the rear of the cabinet,
>> > with the power switch on the front. Is this possible?
>>
>> hello all
>> actually, if stooge industries carry on, i'd very much like them to address
>> this along with 'official' mods to the existing 900psu to incorporate a 1U
>> front panel switch
>>
>> or did we go over this before..?
>>
>> cheers
> > paul b