Hi John.
run your MOTM 100 white noise to the motm 420 in HP mode , then to the VCA
and set the 800 to control the VCA ,it would create the basic hi-hat and
snare's.
if you would use two 300 vco's sine out using FM at high frequency would
yelled a very good source instead of using the 100 as the noise source.
also if you patch the 800 to the vca and to the FM inputs in the 300 you
would get much more "punch" to the sound.
the basic rule (from my experience) about creating percussion is to use ONLY
sine waves.
sine waves are available from any of the MOTM vcf and from the MOTM-300 vco.
hope it help
Gur Milstein
-----Original Message-----
From: Inform3r <
inform3r@...>
To: MOTM List <
motm@yahoogroups.com>
Date: éåí øàùåï 30 éåðé 2002 02:58
Subject: [motm] MOTM percussion
Has anyone ever created any good percussion patches with their MOTM? I
mean anything from snares, hh, basses, tom-toms, etc.... Care to share any
patches?
cheers,
John
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/