Hey, you're welcome! For more interesting variations, try two 300s
connected this way to both channels on the 700. I did this and then
used the TRI out of one to PWM the other and vice-versa. This
fattens things up nicely. Try SYNcing these as well...
Mike
--- In motm@y..., "Josue Arias" <josue@A...> wrote:
> Nice Trick!
>
> Thanks Mike,
>
> Josue.
>
> ----- Original Message -----
> From: "mmarsh100" <mmarsh@s...>
> To: <motm@y...>
> Sent: Thursday, April 18, 2002 10:33 PM
> Subject: [motm] Wave shaping using the 700
>
>
> > Hello All -
> >
> > This may not be news to some, but I've stumbled on a cool trick.
> > Take the SAW out of a 300 to IO A of the 700; take PULSE out of
the
> > same 300 to IO B of the 700. Take SIN out of the same 300 to CV
IN
> > of the 700. IO X to the console or to further processing. Put
the
> > 700 in VOLTAGE MODE. What happens is that the SAW waveform starts
> > and halfway through gets abruptly replaced by the PULSE. Voila!
new
> > waveform. Play with the mix knob some, etc.
> >
> > Mike
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >