Sorry about the length of this: I'm running down a long and
boring master (at least she's hitting some of the pitches -
cringe). If you don't want to read a rambling account about some
of my personal megamixer experience, please move ahead now.
Working a big console is really not that bad once you get used to
it, since in most cases all of channel strips are the same (or at
least similar). It's kind of like sitting in front of a giant 2D
keyboard/sequencer (Godzilla's TKB?). Most of the time
channels are laid out in groups of 8, which gives you your lateral
position, you gotta think in pseudo-octal.
You need a really good rolling chair with a big SSL, though. You
get to where you can fly from one end to the other and if you're
working a lot of channels you can get a bit bruised up by the
armrest. It's hell on your back and knees (even though you're
sitting) - good sneakers are critical. The worst thing is a
collision, I don't know if anyone's ever been seriously injured, but
I've been knocked silly more than once.
As you're flying into position, your lead arm is outstretched
heading for the section of the particular module you're after, then
it's about eye to hand to hit the control as you're breaking with
your lead foot - having pushed off with the other foot/leg and
stabilizing your landing with the other arm and hand assisted by
your belly (this is where your lower ribs can get a little bruised).
Then there are the two arm moves and the inevitable hitting your
knees on rack gear (ouch!).
I haven't done this in over a decade, but it is such a visceral and
athletic experience, I remember it like it was yesterday. I had
barely average skills compared to some of the guys I've worked
and hung out with. Coincidentally, I'm getting ready to help one of
my old friends install a 72 channel Amek/Neve 9098
(ChicagoTrax?) - it's a big boy! I think that only 8 were made.
Rupert's supposedly coming up to "bless" it. It should be a lot of
fun, as I haven't been around a "big board" in a long time.
Barry
--- In motm@y..., "Paul Schreiber" <synth1@a...> wrote:
> All I can add:
>
> look at pictures of any SSL G-Series mixing console. If that's
not confusing, I don't know what
> is.
>
> Engr #1: Boost the mid-teble +2 on channel #27
> Tech#1: Where's my GPS receiver?
>
> Paul S.