I am in the process of converting my Blacet Time Machine to MOTM format and
pose this question. Since all of the grounds on the Blacet schematic
individually "star" back to one point on the pcb, can't I simply connect all
the jacks with unshielded wire in a star type web and run one connection off
this web to the pcb ground for the same overall effect? I used the
unshielded wire method and it appears to work fine. Although in looking on
Larry Hendry's page I noticed that his model uses Blacets wiring scheme
while Dave Hylander uses the "Oakley Type" unshielded wire approach as I
did. Comments?
Thomas White
PS. Nice to not have to fiddle with 1/8 cables anymore :)
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx