Thanks to everybody for the input. I used a hole saw and it worked great! I
will try to post picks soon. The labeling of DIY panels is a bitch. We need
to make those generic labels with tick marks and things like "In" and "Out"
soon! Get these on a nice plastic with adhesive backing that will last on
our hearty panels. Ciao'
Thomas
>From: mark@...
>To: "Craig Critchley" <craigc@...>
>CC: <motm@yahoogroups.com>
>Subject: Re: [motm] Help Guys MOTM
>Date: Tue, 29 Jan 2002 12:07:26 -0500 (EST)
>
>
> >Do punches work ok on 1/8" thick MOTM-style panels? The catalog says up
>to
> >.079" thick aluminum.
>
>It can probably do .079" aluminum with a 5,000lb press -- do you have one
>of those?? :) Regardless, painted .125 is about twice as thick as
>unpainted .079.
>
>If I had to cut a 1" hole in 1/8" aluminum, I'd use a hole saw.
>
>
>
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx