I also sometimes add the MIX OUT to the board mix but with no wet
signal at all. By increasing or decreasing the amount of dry, you
can get better control of the overall sound. This is great for
phaser-like effects.
Don't forget to play with the LFO switch. I almost always use the
DUAL REV mode since it produces complexity, but the other modes work
weel with some voices, too.
Mike
--- In motm@y..., mark@i... wrote:
> ...
> The three separate outputs can be mixed at the board to create
stereo
> effects. This capability can be increased by sending these outputs
through
> phase inverters or short delays, or by modulating the RATE control
with
> another LFO, such as the 320.
> ...