I think I misdescribed what I was going for, but maybe not... in this
hypotehtical patch i made, the VCO was maintaining the same
frequency... it was just that the resonant peak of the filter wasn't
sliding up in frequency smoothly, it sounded like it was jumping from
harmonic to harmonic (of the source tone) Since there was just one
note being sustained for 20 seconds, it doesn't seem like I'd need to
patch into any frequency control on the VCF, though if I wanted to be
able to play this sound...
arrgh getting incoherent here. I think you probably ∗did∗ understand
my question, and are just advising me on how to get the VCF to track
the pitch of the VCO, which I can do (usually)
Anyway the sound I'm going for is a single pitched VCO with a VCF,
and the sinewave type sound, the resonant sound that VCFs make at
high resonance... the filter was being swept smoothly by the
enveloper, but the resonant peak sound hopped. I might just try to
dig up a clip of it on my machine. If I can manage to find something
with that sound, I'll stick it on my site and post the URL.
Thanks for the help, though!
--- In motm@y..., "Paul Schreiber" <synth1@a...> wrote:
> >
>
> You want a '440. The key here is to have the CV of the VCO being
dominant in the VCF as well, and
> carefully adjusting the VCF FREQ and FM to cause the VCF to "track"
the VCO. Also, this effect
> will be more audible for saw and Pulse waveforms. You need to set
the ADSR into the VCF to be in
> the Sustain portion when you want to hear the effect, and
the 'tracking' will be the Sustain
> voltage attenuated by the FM pot.
>
> Paul S.