Archive of the former Yahoo!Groups mailing list: MOTM

Paul had a great idea for you SKB pop up case guys. Because he is deep in
modules (like he should be) and getting ready for NAMM, he has agreed to let
me carry the ball again. If you don't use SKB pop up cases, save yourself
some reading time and hit delete now. :)

So, here is the basic concept. I would love to have some feedback from
those that are interested in such a product. I am not a SKB pop up user, so
your input into the product design is highly valued. I do however, have a
SKB case coming my way graciously on loan from a fellow MOTMer so I can make
sure the prototype fits perfectly.

Here is the idea (once again, Paul's idea, not mine):

A back cover for the MOTM modules so that the backs of the modules are not
hanging out there unprotected when the case is open. The cover would fasten
on from the back. The screws used to fasten the rack rails would be longer
so the cover could attach to them from the back. That way, the cover could
be snatched off quickly and easily without removing anything from the front.
It will be made from stainless steel (I learned that from brackets). So,
without paint it wont rust, but it would be shiny.

So, here are the questions...

How many people would be interested in such a beast?

Would you prefer 12 spaces high to cover the back
of everything or just 10 spaces high to cover the 2
rows of MOTM modules?

What about a top? Should it have one? Or, should
it just be two sides and the back with the top open?

If it has a top, should it be removable? Maybe the
basic back would not have a top, but a top would be
a fasten on option. You tell me.

I expect most people want a black finish.
There are two options when painting black.
1 - black powdercoat like the rack rails
2 - Black Polane with texture like the front of
MOTM panels

Option # 1 will give you the most durable finish.
It will also be the least cost I expect.
Option # 2 will be the prettiest. It will also be
considerably more expensive. But, I could
paint the outside only for option 2 to help cost.

How much, I don't know. I will have to get the estimates
after I get the prototype built.

What about a big SynthTech logo on the back?
Remember I have no experience with the pop up.
Can you actually see the back when opened?

The logo would be another significant cost adder.
But depending on interest. I can put the logo on some
and have some without. Of course, I would have to
consult with the brains of Stooge Panels Inc, Mr. Moe
Bradley concerning the logo. And, Paul would have to
OK the use of his trademark.

So, let me know of your interest (if any). I plan to make one for Paul to
take to NAMM. If I make any more past that, it will be up to you guys.

Larry Hendry