Just so, Josue. The other picture I have is from a DAW with this
illustrated...
--- In motm@y..., "Josue Arias" <josue@A...> wrote:
> I think is clearer if you think when editing samples using
computer: you´ll
> hearf a click sound if you didn´t cut at zero crossing.
> Best Regards,
>
> Josue.
>
>
> > Hello All -
> >
> > A little while ago there was some discussion about the 700 in
audio
> > mode. Folks were noticing a 'click' on switching. I went through
> > this when I first got the module, and as I remember the thing to
be
> > aware of is that even though there is a brief silence inserted
while
> > switching, if the waveforms are out of sync, a click will happen.
> > Imagine a sine wave that gets switched as it is heading up, while
the
> > sine wave being switched in is heading down. The silence is
brief so
> > what you get is:
> >
> > |\
> > | \
> > | \
> > | \
> > | \
> > ------
> > |
> > |
> > |
> > |
> > |
> > /
> > /
> > /
> >
> > I have a better picture of this, if anyone wants to see it I'll
post
> > it in the Files section.
> >
> > This module doesn't morph one wave into another: it simply
switches
> > between the two with a brief silence in the middle. Syncing helps
as
> > does envelope tweaking. It takes a bit of fiddling but you can
get
> > smotth transitions. Note that usues different waveforms for A
and B
> > is more difficult.
> >
> > Mike