I think is clearer if you think when editing samples using computer: you´ll
hearf a click sound if you didn´t cut at zero crossing.
Best Regards,
Josue.
> Hello All -
>
> A little while ago there was some discussion about the 700 in audio
> mode. Folks were noticing a 'click' on switching. I went through
> this when I first got the module, and as I remember the thing to be
> aware of is that even though there is a brief silence inserted while
> switching, if the waveforms are out of sync, a click will happen.
> Imagine a sine wave that gets switched as it is heading up, while the
> sine wave being switched in is heading down. The silence is brief so
> what you get is:
>
> |\
> | \
> | \
> | \
> | \
> ------
> |
> |
> |
> |
> |
> /
> /
> /
>
> I have a better picture of this, if anyone wants to see it I'll post
> it in the Files section.
>
> This module doesn't morph one wave into another: it simply switches
> between the two with a brief silence in the middle. Syncing helps as
> does envelope tweaking. It takes a bit of fiddling but you can get
> smotth transitions. Note that usues different waveforms for A and B
> is more difficult.
>
> Mike