Hi Bleeped and list,
I have a micromodular, reaktor but other real modular as well. For feedback using virtual modulars you´ll need a VCA and a delay module (important!) with a delay of 1-5 samples. at least for programming reaktor works, may be the nord don´t need the vca...Anayway, the sound is quite different than the one from REAL modulars :)
Regards,
Josue.
anyway, i tried the same thing with the nord and found much, much
different results. i had a drone going into the 24db filter, so i just
stuck a three-input mixer between the signal and the filter, and patched
the output of the filter to the main outs as well as to the second mixer
input. nothing. not a lick of difference in the sound. so then i patched
the filter out into the ∗third∗ input as well. nothing. until i start to
turn it up. it gets a little fuzzy, then the volume drops dramatically
until there is only silence. bummer!