Todd,
Where are you at with the OMS-410 kits? At this point I am ready to ask you to send "the parts you do have" and let me find the rest on my own. I am very frustrated with the time this has/is taking you to get these out and your lack of updates or communication in the meantime. On good faith I, among others, sent you payment in full and have received no kit as of yet. You have had the money, panels and pcbs for more than enough time to ship these out and I for sure would like to see or hear about mine soon. Thanks for your comments and response,
Thomas White
----- Original Message -----
Sent: Monday, November 05, 2001 1:45 PM
Subject: [motm] OMS 820 Kit update
Many people who wanted kits began ordering FPs directly from Larry.
Too eliminate any further confusion, I will NOT be providing OMS-820 kits.
You will need to acquire everything yourself including FPs directly from
Larry and PCBs directly from Tony.
This was too much of a hassle last time and the problems are already worse
this time.
Additionally, Dave basically copied Tony's design for the FP which allows
you to use Omeg pots and brackets. I proposed a design to Dave which would
have made the FP more logical, but Dave chose not to use this design. Dave
did not communicate with me as to why, but I assume it is to maintain
compatibility with the Oakley system. I personally prefer the MOTM
standard, so the Oakley placement was not applicable to the FP layout for
me. On the plus side, the Omeg pots and brackets make an L-bracket
unecessary and the LEDs will go on the FP directly from the PCB; this makes
for an extremely elegant design. And this also makes things a lot cheaper.
Make sure to also order your pots and brackets directly from Tony if you are
going to follow this path.
Sorry for any inconvenience.
Todd
http://www.users.qwest.net/~daveb2/images/OMS-820.gif
http://www.oakleysound.com/oms-820.htm
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.