synth1@... writes:
>>
a) set RES to 0 on the panel
b) plug out into mult
c) plug 1 mult out into '110 X IN
d) set X on AC, Y on DC
e) use ADSR OUT + into Y IN
f) output of RM into one of the AUDIO INs of the '420
<<
In the past the only way I was able to get decent sounding filter resonance
by feeding the output back into the input was to invert the signal. I used
the MOTM mixer for that. Unless the RM inverts the signal it probably won't
work properly.
-Elhardt