Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [motm] MOTM-850 Pedal mockup

From: "J. Larry Hendry" <jlarryh@...>
Date: 2001-08-26

One feature perhaps not mentioned is that the 850 will also accept this type
of CV pedal in the pedal input. So, you can still use that pedal and get
the added features of offset and range.

For all you guys that think the Roland EV pedal is nice, you must not have
tried the Yamaha FC-7. The Yamaha is far superior to the Roalnd pedal in
every way. Buy yourself one and you will never go back. I have 3 FC-7s.
Two have 12 years of gigging on them. The third is my spare, which I have
never needed.

Larry Hendry


----- Original Message -----
From: <elhardt@...>
I have one of those old Moog pedals I was just
about to plug in myself. However that pedal doesn't
operate as nicely as the Roland and probably
Yamaha pedals. In the past I always seemed to have
problems getting it to control a parameter and match
up with the pedal position the way I wanted it too.
That's probably because of its lack of scaling and
offset controls.

-Elhardt