And if the scope is X-Y, hook original into X and output into Y. Then, sweep
at about 100Hz with a triangle :)
Watch the pretty pictures :)
Paul S.
----- Original Message -----
From: <elhardt@...>
To: <motm@yahoogroups.com>
Sent: Friday, August 24, 2001 10:46 PM
Subject: Re: [motm] actually, 420 mod? (phasers)
> >and another part of my reluctance to purchase a 420 is that I've not
found
> notch filters all that useful)<
>
> >>Two filters in series in ∗Notch∗ mode emulate a 4-stage phaser. With a
> single filter (one notch) the effect is too weak for being recognized as
> phaser<<
>
> And to add to this thread, since I bought an oscilloscope several months
ago
> I was able to hook up two probes to the MOTM. One before a filter and one
> after, which allows you to easily see the phase shifted output of the
filter
> as you sweep the cutoff frequency around. So when you mix the sound
before
> the filter with the filtered sound and sweep the cutoff you get a phaser
> sound. Now hook up a bunch of filters and create the ultimate custom
> phaseshifter.
>
> -Elhardt
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>