You can cut your potential culprits in half by determining whether
the +15v or the -15v line is shorted. Plug it back in briefly, long
enough to check the power supply voltages, and see which one doesn't
measure correctly.
Are you sure the polarity on your electrolytic caps (the tall cans)
is correct?
Moe
--- In motm@y..., dowk@e... wrote:
> I tracked down a short in my system to the
> MOTM 800... It's not the wire so it has to
> be in the module somewhere... I double checked
> and everything is in the right place. Any ideas?
>
> Dow