Bob,
I don't have any experience with Moog equipment, but my understanding that
the trigger/gate signals are not compatible with most other equipment. MOTM
envelope generators are looking for a 0 to +5V transition for the gate
signal. You should connect your Opus 3 gate out to a meter or scope and see
what the signal level is when a key is depressed, and when no key is
depressed.
John Loffink
microtonal@... ----- Original Message -----
From: "Bob" <bob@...>
To: <motm@yahoogroups.com>
Sent: Sunday, July 01, 2001 9:48 PM
Subject: [motm] EG-800 debugging question
>
> hi hi hi,
>
> I just finished putting together my ∗first∗ kit (assembling the power
supply doesn't count), the EG-800. I plugged my Moog (I'm running it
through an Opus 3) into the Gate jack, pressed down a couple of keys and got
a terribly distorted and scratchy sound in return. It was like the envelope
was trying to generate the sound, but couldn't.
>
> I looked over the pcb and the directions and everything seems to be in
the right place.
>
> So I was wondering if the problem might lie in the soldering of the
jacks. Or maybe it lies in the soldering of the pots, I'm not sure.
>
> I'm terribly new with EE and thought I'd ask you guys for some thoughts
instead of spending endless hours trying to figure out what might be the
problem.
>
> thanks in advance,
>
> -Bob K
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>