> > This is a don't care for me, as any cabinet I build will be large enough
> to
> > consume the power from a good sized power supply.
>
> Based on this, I'm curious, are you using a separate power supply for each
> cabinet?
>
Yes...well, when I build a second cabinet. :-) My first is 18U x 15U and
about 6 months away from being filled.
> > The cross (AND function) could be useful for unusual
> triggering
> > modification, and add something different than the upcoming VC Pulse
> Divider
> > module.
> >
> I agree. I also think it would be interesting to design a switch to
> exchange the cross-function chip for other mathematical operations.
>
Other logic functions would be nice too. Now you're talking about taking
both counter outputs to the daughter board, performing the logic functions,
then Muxing them. This would also require another panel switch, maybe two
switches that do a binary selection between SUBOCTAVE, CROSS (AND), OR and
XOR.
By the way, I would view these mods as useful functions for gate
manipulation, not for audio processing. The separate outputs and logic
functions won't add much to waveform mangling.
John Loffink
microtonal@...