Moe wrote:
> 1. A 1U panel with power switch and fuseholder, and 2 output jacks
> for buffered +15v and -15v.
Would this be used for power distribution to multiple cabinets? My target
system is three cabinets, so I'm in the process of designing a power system
to support it. I plan on replacing the 900 with a +-15V 3A PowerOne. Also,
future modules may require +5V so I'm including a separate PowerOne for that
as well. Part of my concern is insuring that the star distribution system
is maintained, for obvious reasons. I'm not sure if a single 1U panel would
handle all of the necessary functionality for multiple cabinets. I've
picked up 1U and 2U blanks to play around with specifically for this
purpose. I would definitely go for stooge power panels over my own designs
provided they supported multi-cabinet properly.
Moe wrote:
> 2. A MOTM-120A panel. The MOTM-120A would be laid out just like a
> 120, but would have 4 extra jacks in the top row position. These
> would support a mod bringing out all 4 sub octaves to their own
> buffered full amplitude outputs. The mod would mount on a
> daughterboard like the MOTM-800 output LED mod at my site.
>
> Yes? No? Maybe?
Yes!
Cheers,
George