Archive of the former Yahoo!Groups mailing list: MOTM

Hey Paul -

Here's a short demo of 3 different voices mixed together on the 830. Each
voice was mangled separately then brought together in the mixer and fed
through the VA to the 410 to the recorder.

Voice one uses a 300 with TRI, SAW, and PULSE voice outs into IN 1 through 3
of the 420. Each input knob is at max, so I get distortion from the 420.
The OUT of the 420 goes to IN 1 of the mixer.

The second voice has the 300's SIN feeding the A IN of the 120. The B IN is
fed by the PULSE out of the 320 LFO (which also syncs the 101). The 120 is
in CROSS mode with only SUB 1 & 2 turned up. The out goes to the 440 whose
EG is controlled by the same EG as the 420. The OUT goes to IN 2 of the 830
mixer.

Finally, the SAW out of a second 300 feeds X IN of the 110, while the TRI
out of the LFO feeds Y IN. The OUT of the Ring Modulator then goes to IN 3
of the mixer.

Amazing.

Mike