At 6:36 PM +0000 06/13/01,
Randallx@... wrote:
>
>Anyone use the Tee Bee to interface with MOTM? Can it be done? Here
>are its specs:
>
> Four (4) CV/Gate outputs (CV range 0-5 Volt, Gate range
> 0-5Volt or 0-10Volt).
>
> Free selectable MIDI channel for each pair CV/Gate outputs.
>
> Free selectable Volt/Oct or Volt/Hz for each CV output.
>
> Free selectable polarity for each Gate output.
>
> Pitch wheel sensitive CV.
>
> Sound knobs can control CV of all CV/Gates.
>
> Polyphone to monophonic selection algorithm.
>
>
>Any help would be greatly appreciated.
I've never used a Syntecno TeeBee, but based on the above listed specs, it
should work. The MOTM-800 responds to positive going gates from 0 to +13V,
and the MOTM-320 and MOTM-300 respond to 1V/Oct. A Roland TB-303 works
just fine.