Small 1" wood blocks glued/screwed into corners with Velcro or screw inserts?
Terry
Microtonal wrote:
> I just built myself a cabinet for my MOTM system. Does anyone know a good
> way to non-permanently fasten a panel to the rear? It's usually easier to
> get to power connectors from the back and I don't want to paint myself into
> a corner by nailing that panel down. The cabinet is made of 3/4" birch
> plywood and too soft to use screws more than a few cycles. The back panel
> is 1/4" birch plywood. I couldn't find any latches at the hardware store
> that seemed like they would work. Any suggestions?
>
> John Loffink
> microtonal@...