Archive of the former Yahoo!Groups mailing list: MOTM

Forgive me if this is known problem. I would email Paul S. directly, but
he is on a much deserved holiday.

The pots and jacks will not fit in the 410 panel I have. This isn't
because of the way I soldered the Spectrol pots as not even one pot will
fit. The Bourns pots won't fit either. Neither do any of the jacks.

I tested the same pots with the 800 panel (the only other panel I have
left). The jacks fit, 410 Spectrol pots fit, the pcb Bourns pots from the
800 kit fit, but the lug Bourns pots from the 410 do not.

I'm thinking the 410 panel might have been drilled with the wrong size bit.

Has anyone heard of this before??

On a happy note, I assembled the 320 and 820 and they seem to be working
perfectly, including 820 bypass function with my Kenton Pro 4 :)

Overall, I am delighted with the design, function, build quality, and
detailed instructions, of each kit. I just seem to have run into a dead
end in finishing my 410.

THANX!!