--- In motm@y..., mark@i... wrote:
> At 4:47 PM -0800 03/24/01, improv@p... wrote:
> >
> >It's not as bad as you might be thinking right now. Don't panic,
> >and definitely don't let this issue scare you off from MOTM.
>
> I apologize for overreacting.
>
> >I have no problem interfacing my MOTM with the rest of my studio
> >using only currently existing modules.
I'll second this. I've run both MOTM-level AND line-level (mixer
sends, tape deck outs, other synths) signals through all three MOTM-
400 series filters without any trouble. The only issue ∗might∗ be if
you want to run, say a MOTM-300 VCO AND an external line-level signal
through one of the filters simultaneously (using the ever-so-
convenient built-in-mixer that the -420 & -440 have); in that case,
the only "problem" is that you'll need to set the MOTM-300 input at
about "2" and the line-level input at about "8" to get a balanced
mix. And that's what the knobs are there for ...
-Doug
ceres@...