> My guess is the link jack might be a way to chain VCA outputs together
> without tying up a mixer, sort of like auxiliary inputs that aren't
> controlled by the VCA but just mixed in, but then it would seem like you'd
> need two link jacks, not one.
Inputs ∗and∗ outputs are normalized so you will always get the desired
pan or crossfade function. Link jack is if you want to combine
more than 2 VCAs.
You always have ∗both∗ CV inputs active at the same time, linear and
exponential. In pan and fade mode, the linear CV is used to pan and fade,
and you can still use the expo input for loudness control.
(In other words, there is no need to run a signal thru more than one VCA
in series for panning and yout final synth voice's VCA - the combination
is done in the CV rather than the audio path.)
JH.