Archive of the former Yahoo!Groups mailing list: MOTM

There's no gap in your rails; the original discussion here was using 19"
rails as horizontal beams in a cabinet.


-----Original Message-----
From: Paul Schreiber [mailto:synth1@...]
Sent:Friday, 16 March, 2001 12:41 PM
To:motm@yahoogroups.com
Subject:Re: [motm] mounting idea

Hello! there is NO GAP.
The MOTM rows butt up bottom-to-top edges with no gap at all! The
center-to-center hole
spacing is set up specifically not to gap.

Now, what the poster wants to do brings new meaning to the term "wing
cabinet"! Maybe more like
'flying wing cabinet' :)

Be aware of 2 things:

a) the holes are 8-32 tapped NOT 10-32 which "standerd" rail stock uses
b) the rails MUST be no more than 0.500" wide, or you will hit the top row
of pots
(or the bottom row of jacks!)

Paul S.






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/