John has a point. Since the BIAS pot must be on the right side due to
physical constraints, how about if the LEFT side had 3 log pots with
range 0 - 10, and the RIGHT side had 3 linear pots, two of them
reversing.
Then mixer 1 is optimized for audio, pot taper wise, and mixer 2 is
optimized for cvs with reversing attenuators and the bias knob.
Paul, is there any practical reason that the log pots can't go
offboard?
Moe
--- In motm@y..., "Microtonal" <microtonal@w...> wrote:
> Well, not to be nitpicky, but I would want the bias pot to be on
the left
> column and mixer, since that side is more likely to be used with
control
> voltages (linear pots and reversing attenuator).
>
> I would definitely like to have log pots on the right side mixer.
>
> John Loffink
> microtonal@w...
>