Well, not to be nitpicky, but I would want the bias pot to be on the left
column and mixer, since that side is more likely to be used with control
voltages (linear pots and reversing attenuator).
I would definitely like to have log pots on the right side mixer.
John Loffink
microtonal@... ----- Original Message -----
From: "Paul Schreiber" <synth1@...>
To: <motm@yahoogroups.com>
Sent: Sunday, March 04, 2001 2:13 PM
Subject: [motm] Battle over
> Thanks for all the Mixer suggestions. Here is the "final" decision:
>
> a) Mixer model is 830, as in MOTM-830
>
> b) Moe inage #1 is the design: a bias switch, and a switched jack. The
> reason I like the
> jack is that it minimizes wiring, and is sort of slick, imho. I don't see
a
> need for switches/LEDs
> as certainly you know if a patchcord is plugged into OUT 1 or not.
>
> And if you want to play reconfiguration games 'on-the-fly-, look at the
> MOTM-700. That's what it's for :)
>
> c) Now, since I am ∗assuming∗ that 95% of the time, this is an audio
mixer,
> then I propose that
> the D/E/F inputs (the right column) all 3 be log pots. The reason they
have
> to be over there is that
> the are pcb mounted. Then on the left column, these are 100K Bourns panel
> pots and A is normal and
> B & C are reversing attenuators. You want reversing atenuators to be
linear,
> anyway!
>
> Well?
>
> Paul S.
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>