You should have enough power with 13 modules. Did you unplug individual
modules and reconnect them, or add any new modules since you last had it
running? The no led syndrome is typically something pulling the +15v
down. Check to make sure no cables have been installed backwards. It's
hard to do, but not impossible. If you find nothing, unplug all the
modules, then one by one, plug them back in again, starting with the
320. When you plug in a module and the 320 led stops working, chances are
that's the power cable or module pulling the system down.
-dave-
At 07:45 PM 2/24/01 -0500, you wrote:
>I replugged my MOTM system in tonight, after unplugging
>everything, and taking into another room while painting.
>After replugging everything in tonite, my 320 LED does not
>oscillate from red to green, and just stays red, also my two
>LED modded 800 EG's are not working? I recently added a few
>new modules, could I not have enough power form my 900 PS
>for everthing? I have a total now of 13 modules now off of
>1 900 (and one extender cables).
>Thx for any help in advance.