Correct. That's about 80Hz.
Paul S.
----- Original Message -----
From: <bruce@...>
To: <motm@yahoogroups.com>
Sent: Thursday, February 22, 2001 8:04 PM
Subject: [motm] Fixed my MOTM-300
> Well, turned out that one of my solder joints was a little light on
> the solder. MOTM-300 seems to be mostly working, but now some
> questions for those of you who have built them.
>
> I have not yet started the alignment steps, but by default the VCO
> does not output a waveform in that audible range until coarse setting
> around 4 for the one I have.
>
> Is this correct? Is this something that will be taken care of in
> alignment if not? Or do I need to keep looking for problems on my
> board.
>
> Thanks for all who gave me tips.
>
> Bruce
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>