Archive of the former Yahoo!Groups mailing list: MOTM

Well, turned out that one of my solder joints was a little light on
the solder. MOTM-300 seems to be mostly working, but now some
questions for those of you who have built them.

I have not yet started the alignment steps, but by default the VCO
does not output a waveform in that audible range until coarse setting
around 4 for the one I have.

Is this correct? Is this something that will be taken care of in
alignment if not? Or do I need to keep looking for problems on my
board.

Thanks for all who gave me tips.

Bruce