Hi-
Some people might complain, but I wouldn't mind this feature at all. Er,
that's because I don't reallly have any in-house step sequencers at the
moment!
Frank Vanaman
Tony Karavidas wrote:
>
> There was a mistake in the previous email. I said TIME1 and I meant TIME8.
> I've corrected it below:
>
> Yes, I can't leave it alone!
>
> What would you UEG owners say if the GATED-STEP mode (the simple sequencer
> mode) had this enhancement:
>
> Allow the level to be adjusted WHILE the UEG is sitting still? This would
> aid in setting up pitch for each stage. Now if you like that idea, how about
> having LEVEL 1 through 7 control stages 1 through 7, AND IN ADDITION, have
> TIME8 control LEVEL8? Currently LEVEL8 must default to zero volts because
> there is no level control for stage 8. Robert Rich and I were on the phone
> and he suggested it's a little awkward to have to set the oscillators "base"
> note to correlate with the zero volt output from stage 8. (I kind of don't
> like burying things in the interface, but in this case it might be a good
> compromise)
>
> If I here overwhelming "go for it" I'll add it to all the units that haven't
> shipped yet. For anyone that already has their UEG and wants this just send
> it to me and I'll update it.
>
> I've also extended the TRIG OUT time to 5mS. This should help it trigger
> more things with ease.
>
> Your quick reply is requested, people are waiting for these. The manual is
> done with exception of the above issues.
>
> Tony Karavidas
> Encore Electronics
>
> http://www.encoreelectronics.com
>
> Designers of "The best MIDI to CV converter on the planet." -Keyboard Oct.
> 1997
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/