There was a mistake in the previous email. I said TIME1 and I meant TIME8.
I've corrected it below:
Yes, I can't leave it alone!
What would you UEG owners say if the GATED-STEP mode (the simple sequencer
mode) had this enhancement:
Allow the level to be adjusted WHILE the UEG is sitting still? This would
aid in setting up pitch for each stage. Now if you like that idea, how about
having LEVEL 1 through 7 control stages 1 through 7, AND IN ADDITION, have
TIME8 control LEVEL8? Currently LEVEL8 must default to zero volts because
there is no level control for stage 8. Robert Rich and I were on the phone
and he suggested it's a little awkward to have to set the oscillators "base"
note to correlate with the zero volt output from stage 8. (I kind of don't
like burying things in the interface, but in this case it might be a good
compromise)
If I here overwhelming "go for it" I'll add it to all the units that haven't
shipped yet. For anyone that already has their UEG and wants this just send
it to me and I'll update it.
I've also extended the TRIG OUT time to 5mS. This should help it trigger
more things with ease.
Your quick reply is requested, people are waiting for these. The manual is
done with exception of the above issues.
Tony Karavidas
Encore Electronics
http://www.encoreelectronics.comDesigners of "The best MIDI to CV converter on the planet." -Keyboard Oct.
1997