I have had my '910 for about a month or so. Perhaps a bit longer. There
are on the web page now too under New.
Their power consumption ratings are extremely low. They make incredible
noises--especially from the 10th floor up.
My only complaint is that the line thickness is a little heavier than the
other modules and the arrows seem a bit bulky.
YOUR BASE ARE BELONG TO US!
--Shemp
> -----Original Message-----
> From: Tkacs, Ken [mailto:ken.tkacs@...]
> Sent: Tuesday, February 20, 2001 9:05 AM
> To: 'motm@yahoogroups.com'
> Subject: [motm] EG question/problem
>
>
>
>
> Have the 940's even shipped yet...?
>
> -----Original Message-----
> From:Paul Schreiber
> To:motm@yahoogroups.com
> Sent:2/17/01 10:24 AM
> Subject:Re: [motm] EG question/problem
>
> What mult? The '910 or '940?
> It should work fine, unless you plugged into the '910s splitter jack.
> Paul S.
> ----- Original Message -----
> From:"Tentochi" <tentochi@...>
> To:"MOTM Mailing List" <motm@yahoogroups.com>
> Sent:Saturday, February 17, 2001 12:54 AM
> Subject:[motm] EG question/problem
>
>
> > I am running the + out from my EG into my VCA and - out into FM1 of my
> 420
> > and everything works fine. I don't have any way to reverse the
> polarity
> of
> > the - out, so I ran the + out into the mult and then took two signals
> from
> > there. No good! Neither the VCA nor the filter respond to the EG
> when it
> > is set up like this.
> >
> > What gives???
> >
> > Thanks!
> > Shemp
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>