That's "our" Paul's old midi2sds marketed by Elby. It works OK (but I
accidentally fried mine) but I'd like it to go to +15 volts for full
potential...
But, good stuff!
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
---
Angaudlinn on iTunes:
https://itunes.apple.com/us/artist/angaudlinn/id582356650Angaudlinn's playlist på Spotify:
http://open.spotify.com/user/simplyanalogue/playlist/540Srd3zA15pK7G1S8qLHoAngaudlinn on facebook:
https://www.facebook.com/AngaudlinnDen 2016-11-18 kl. 14:35, skrev 'Michael Buchner'
buchnerelectronics@... [Simmons_Drums]:
>
>
>
>
> Check this on the web:
>
>
> The ED103-MIDI2SDS is an 8-channel MIDI note to Trigger unit suitable
> for use with a variety of synthesizer modules and drum machines
> including the SDS range from
> Simmons for which it was originally designed.
>
>
>
> The unit has 8, velocity sensitive, trigger outputs each of which can be
> assigned to aspecific MIDI Note using the `LEARN’ mode.
>
>
>
> ∗Features∗
> 8 Trigger outputs each being able to swing between 0V (LO) and +10V (HI)
> in 127 steps as defined by the MIDI Velocity received.
> When in TRIGGER mode the duration of the trigger pulse is adjustable
> from around 1mS
> to 130mS as set by an onboard trimmer.
> When in GATE mode the trigger is controlled by Note-On and Note-Off
> commands.
> An INVERT mode allows the trigger outputs to swing from HI to LO.
> ∗Specifications∗
> Power +12V @ 50mA
> -12V @ 10mA
> TRIGGER Output Range Velocity controlled from 0V to +10V in 127 steps.
> Onboard trimmers allow the LO and HI voltages to be
> adjusted to provide finer resolution:-
> LO can be adjusted from 0V to ~2V
> HI can be adjusted from ~6V to 10V
> TRIGGER Output Duration Adjustable from 1mS to 130mS
> User Selectable Options
> TRIGGER/GATE Mode
> INVERT Mode
> Determines if output is pulsed or MIDI controlled
> Determines if outputs swing LO to HI or HI to LO
>
>