Solved it!
Apparently the "thru-service" of one unit wasn't working up to the specs
of the MTM. Early midi can be grumpy... I rearranged the midichain and
it solved the problem.
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
---
Angaudlinn on iTunes:
https://itunes.apple.com/us/artist/angaudlinn/id582356650Angaudlinn's playlist på Spotify:
http://open.spotify.com/user/simplyanalogue/playlist/540Srd3zA15pK7G1S8qLHoAngaudlinn on facebook:
https://www.facebook.com/AngaudlinnDen 2016-11-14 kl. 21:17, skrev jesper
jesper@... [Simmons_Drums]:
> Hi hexaheads!
>
> After my studio rebuild it is up and running again and I'm slowly
> finding the trouble spots. The midi is messing with me, as is often the
> case when I get into trouble.
>
> After eliminating as much as possible, this works:
> midi master keyboard midi out -> MTM midi in = trig success!
>
> After hooking everything back as it should be:
> midi chain is unbroken up to my midi patch which just echoes incoming
> midi to seven outputs and also confirms it by LED. The MTM won't trig
> anything.
>
> I've switched cables, changed outputs etc. And I have two other MTMs
> hooked to the same midipatch and these suxxers work and trig as they should.
>
> If I rewire the test setup, it works again. All the MTM settings are
> identical in the MTMs, except for the midi note triggers. But I've moved
> these around too just to test... The MTM is running OS 4 and has the
> highest serial (800) of my three units.
>
> What am I missing?! ∗cry of desperation∗
>